NTRIP setup guides
Step-by-step setup for popular drones and RoverThe receiver that moves around the job, like a survey pole or a drone. It uses the base's corrections to find its exact spot.More, in plain words, based on each maker's own manuals.
DJI RC Plus / DJI Pilot 2 (any Enterprise drone)
The DJI RC Plus and RC Plus 2 controllers run the DJI Pilot 2 app. Its built-in NTRIP feature (the part that pulls in corrections over the i…
Open guide →DJI Matrice 350 RTK
The M350 RTK has RTK built in. You set it up with Custom Network RTK in the DJI Pilot 2 app on the DJI RC Plus. DJI says the controller need…
Open guide →DJI Mavic 3 Enterprise (M3E)
The Mavic 3E needs the DJI RTK Module attached on top. Until it is, the RTK settings won't show up. The drone flies from the DJI RC Pro Ente…
Open guide →DJI Matrice 4E
The Matrice 4 series has RTK built in. DJI says that for Custom Network RTK, the controller needs Wi-Fi, or a DJI Cellular Dongle 2 with a n…
Open guide →Emlid Reach (RS3, RS4, RX, RS2+)
You set up Reach receivers with the Emlid Flow app. The easiest way is NTRIP via mobile device. Your phone connects to the Reach over Blueto…
Open guide →Trimble Access (R-series rovers)
In Trimble Access you save your NTRIP server once as a correction source. Then you tell your RTK survey style to use it. (A survey style is …
Open guide →Carlson SurvPC / SurvCE
Carlson's field software has NTRIP built in. You'll find it on the RTK tab of the GPS Rover setup screen.
Open guide →Trimble Catalyst (DA1 / DA2) with Trimble Mobile Manager
Catalyst uses Trimble's own corrections by default (the Trimble Corrections Hub). To use your state network or another NTRIP service instead…
Open guide →Leica GS18 / GS16 with Leica Captivate
On a Leica rover you set up NTRIP in Captivate, usually with the RTK rover wizard. It saves everything as an RTK profile you can reuse. The …
Open guide →CHC i80 / i90 / i93 with LandStar 8
CHC rovers use the LandStar 8 app. You make a GNSS rover work mode that uses NTRIP. The internet can come from a SIM card in the receiver or…
Open guide →Topcon HiPer with MAGNET Field
Topcon HiPer rovers are set up in MAGNET Field (or Topcon's field app). You pick network RTK, NTRIP, then enter your caster details.
Open guide →Spectra Geospatial SP85 with Origin
Spectra's Origin field software works a lot like Trimble Access. You set the internet data link inside your RTK survey style and add an NTRI…
Open guide →DJI D-RTK 3 Multifunctional Station
The D-RTK 3 has three modes: base station, relay, and rover (a handheld survey pole). Press the power button three times to switch modes. In…
Open guide →